Remote water meter without magnetic sensing_Wireless Internet of things water meter_Intelligent Series_Products_English

Position：English > Products > Intelligent Series > Wireless Internet of things water meter >

Wireless Internet of things water meter

Remote water meter without magnetic sensing

he rotor liquid seal wet water meter is adopted as the base meter, which has no electronic components inside and is not affected by water, moisture and other environment; the remote data is accurate to the ascending position, which can capture and analyze the real-time water data. Through the wireless communication technology such as NB-IOT / LoRrawan, the remote data can be read and collected, which can be used for big data analysis such as pipe network leakage and water characteristics of household meters.

More Wireless Internet of things water meter

Detailed Introduction

Product principle

Non magnetic sensing remote water meter is a kind of electronic remote water meter, which takes mechanical water meter as the measuring base meter and collects water meter data through the number of rotation circles of semicircular steel sheet pointer on the sensing base meter.

无磁传感远传水表原理

Product features

·The remote data is accurate to rise, and can be measured in both positive and negative directions. The meter end has the function of water use analysis, and real-time abnormal water use warning is realized through the network, which is conducive to water Big data analysis.

·Good protective performance, suitable for outdoor underwater installation.

·The water meter and electronic unit can be installed separately, facilitating after-sales service.

Four innovation functions

①Split valve control

·Convenient operation: Bluetooth communication valve can be directly installed on the basis of the existing wireless water meter to realize wireless remote control. The valve length is consistent with the standard nozzle nut, so it is very convenient to replace.

·Reduce the cost of water company: It is unnecessary for individual users not to pay, so that all users must install integrated valve controlled water meters, effectively reducing the cost of water company.

·Reduce safety risk: in case of valve failure, it is unnecessary to replace the whole meter; The water meter and valve battery shall be installed independently, without mutual interference, so as to reduce safety risks.

·Adapt to various on-site conditions: NB IoT、Cat.1、WLAN、satellite communication to achieve different customer needs.

·Remote real-time control valve: Adopting the new generation ultra-low power consumption NB technology, the on-off valve can be controlled in real-time through remote or APP, and the NB end battery life is long, solving the problem of management lag. At the same time, the valve supports custom data reporting time, can preset water use warning values, automatically remind users to pay, and automatically close the valve when crossing the line.

·Solution to the charging problem: The product supports prepaid functionality, allowing for self-service payment on multiple platforms, both online and offline. It implements the principle of buying water before using it, avoiding the inconvenience of manual door-to-door charging.

招聘邮件位置

②Power display

Breaking through industry tradition, changing lithium-ion batteries to lithium-manganese batteries. It can display the remaining battery power and significantly reduce the management risks brought by the battery.

③Pfreeze-proofing

The temperature sensor is added in the water meter communication module, which can monitor the ambient temperature regularly every day, give early warning and prevent freezing accurately.

1667959484f4f9aa

④Bluetooth meter reading function

The water meter and Internet of Things communicator are connected through Bluetooth to solve the problem that the deep well water meter cannot be uploaded due to poor NB signal.

One Internet of Things communicator can connect multiple centrally installed water meters, without independent configuration of modules, to pay fees and reduce the use cost.

微信图片_20230718101148

Product parameters
Model	Range ratio	Overload flow	Common flow	Boundary flow	Minimum flow	‍Minimun reading	Maximum reading
	Q3/Q1	Q4m³/h	Q3m³/h	Q2L/h	Q1L/h	m³	m³
LXSGY-15W	R80	3.15	2.5	50	31.5	0.0001	99999.9999
	R100			40	25
	R125			32	20
	R160			24	15.6
LXSGY-20W	R80	5	4	80	50	0.0001	99999.9999
	R100			64	40
	R125			51.2	32
	R160			40	25
LXSGY-25W	R80	7.875	6.3	128	78.75	0.0001	99999.9999
	R100			100	63
	R125			80	50
	R160			63	40
LXSGY-40W	R80	12.5/20.0	10.0/16.0	200300	125/200	0.001	99999.999
	R100			160/256	100/160
	R125			128/205	80/128
	R160			100/160	63/100
LXSGY-50W	R80	31.5	25	500	312.5	0.001	99999.999
	R100			400	250
	R125			320	200
	R160			250	156.25
Accuracy	level 2				Environmental rating		O/B
Temperature class	T30				EME		E1/E2
Pressure rating	1.0MPa
Sensitivity level	U10D5
Degree of protection	IP68
Installation method	horizontal/vertical
Power supply mode	3.6V lithium battery
Nozzle type	thread
Communication interface	NB-IoT\Cat.1\WLAN\Satellite communication
Operator frequency	Telecom\China Unicom\China Mobile
Surface material	stainless steel\copper\ductile iron\plastic

Shape and structure

7777

Installation dimension

Installation position	DN	L(mm)	W(mm)	H(mm)	Link thread
horizontal	15	165	90	140	G3/4B
	20	195	90	140	G1B
	25	225	100	150	G11/4B
	40	245	110	190	G2B
	50(flanged）	280	165	230	4-φ19
vertical	15	105	90	130	G3/4B
	20	105	90	130	G1B
	25	108	100	139	G11/4B
	40	200	110	180	G2B
	50（flanged）	280	165	230	4-φ19

微信图片_20230727092947

Product Application

Wireless Internet of things water meter

Remote water meter without magnetic sensing

Detailed Introduction

Product Display

CONTACT